高强铝合金双脉冲VPPA焊缝成形机理

建立双脉冲VPPA(variable polarity plasma arc)焊接系统，进行7A52高强铝合金双脉冲VPPA焊接工艺试验，研究低频脉冲调制叠加高频脉冲对VPPA焊接过程中焊缝成形和焊缝力学性能的影响. 结果表明，低频脉冲周期性振荡液态熔池，可获得表面饱满的鱼鳞纹焊缝；高频脉冲使电弧更为集中，有效地提高了电弧能量密度，穿透力加强；双脉冲耦合振荡加强了对熔池的搅动作用细化了铝合金焊缝晶粒. 焊接接头抗拉强度达到384.13 MPa，相比VPPA焊接接头强度提高了10.21%左右；焊接接头断面收缩率和断后伸长率均有一定程度的提高. 铝合金双脉冲VPPA焊接工艺提高了焊接接头力学性能.     

Design and implementation of current mode circuit for digital modulation

This paper proposes a new current-mode digital modulation circuit. The proposed circuit is MOS only hence, easily integrable. It employs an Extra X Current Conveyor (EX-CCII), two MOS transistors as switches, and a two MOS transistor-based active resistor. The amplitude shift keying/phase shift keying/frequency shift keying (ASK/PSK/FSK) modulator is obtained by proper selection of carriers (I_C1, I_C2). This circuit provides the current output signal at high output impedance, which is favorable for cascading. Also, the circuit is employing only MOS transistors, so it can be monolithically IC implementable. The effects of non-idealities and parasitics of the active element on the circuit performance are also investigated in detail. The functionality of the proposed digital modulator is verified through the Cadence Virtuoso tool using 0.18 μm Generic Process Design Kits parameters with the ±0.9 V supply voltage. The total area of the layout is 968.75 μm². Also, the experimental results are verified by using the IC AD-844 and IC CD4007.     

Anticancer activity of flavonoids accompanied by redox state modulation and the potential for a chemotherapeutic strategy

Since researchers began studying the mechanism of flavonoids’ anticancer activity, little attention has been focused on the modulation of redox state in cells as a potential chemotherapeutic strategy. However, recent studies have begun identifying that the anticancer effect of flavonoids occurs both in their antioxidative activity which scavenges ROS and their prooxidative activity which generates ROS. Against this backdrop, this study attempts to achieve a comprehensive analysis of the individual and separate study findings regarding flavonoids’ modulation of redox state in cancer cells. It focuses on the mechanism behind the anticancer effect, and mostly on the modulation of redox potential by flavonoids such as quercetin, hesperetin, apigenin, genistein, epigallocatechin-3-gallate (EGCG), luteolin and kaempferol in both in vitro and animal models. In addition, the clinical applications of and bioavailability of flavonoids were reviewed to help build a treatment strategy based on flavonoids’ prooxidative potential.     

Rational design of thermally stable polymorphic layered cathode materials for next generation lithium rechargeable batteries

Classical layered transition metal oxides have remained the preferred cathode materials for commercial lithium-ion batteries. Variation in the transition metal composition and local ordering can greatly affect the structure stability. In classical layered cathodes, high concentrations of electrochemically inert Mn elements usually act as a pillar to stabilize the structure. When excess amount of Li and Mn are present in the layered structure, the capacity of the Li-rich layered oxide (molar ratio of lithium over transition metal is larger than one by design) can exceed that expected from transition metal redox. However, the over lithiation in the classical layered structure results in safety issues, which remains challenging for the commercialization of Li-rich layered oxides. To characterize the safety performance of a series of Li-rich layered cathodes, we utilize differential scanning calorimeter and thermal gravimetric analysis; this is coupled with local structural changes using in situ temperature dependent synchrotron X-ray diffraction and X-ray adsorption spectroscopy. These methods demonstrate that the gradual decrease of the Mn–M (M = Ni, Co, Mn and Li) coordination number directly reduces structural stability and accelerates oxygen release. For safety characterization tests in practice, we evaluate the thermal runaway process through accelerating rate calorimeter in 1.0 Ah pouch cells to confirm this trend. Using the insights obtained in this work, we design a polymorphic composition to improve the thermal stability of Li-rich layered cathode material, which outperforms Ni-rich layered oxides in terms of both electrochemical and safety performances.     

Enable high reversibility of Fe/Cu based fluoride conversion batteries via interfacial gas release and detergency of garnet electrolytes

Garnet-type Ta-doped Li₇La₃Zr₂O₁₂ (LLZTO) electrolyte suffers from unstable chemical passivation under air exposure, responsible for the poor interfacial wettability and conductivity with Li metal. Instead of conventional methods to remove surface contaminants by mechanical polishing, acid etching and high temperature reduction, herein we propose a simple strategy of interfacial gas release and detergency to smartly convert Li₂CO₃ passivation layer into ion-conductive Li₃PO₄ domains at mild temperature (∼200 ℃). The in-situ formation of PH₃ vapor and its phosphorization enables a dramatic decrease of Li/garnet interfacial resistance down to 2 Ω cm² at room temperature (RT). The improved interfacial wettability and conductivity endow the symmetric cells with ultra-stable galvanostatic cycling over 1500 h and high critical current density of 2.6 mA/cm². The high coulombic efficiency of Li plating enables a high reversibility of solid-state NCM811/Li cells even under a low N/P ratio (∼4) and high cut-off voltage of 4.5 V at RT. The prototype of fluoride-garnet solid-state batteries are successfully driven as rechargeable system (rather than widely known primary battery) with high conversion capacity (400 ∼ 500 mAh/g) and high-rate performance (251.2 mAh/g at 3 C). This interface infiltration-detergency approach provides a practical solution to the achievement of high-energy solid-state Li metal batteries.     

Regulation effect of osteoblasts towards osteocytes by silk fibroin encapsulation

Herein, the rational design micromilieus involved silk fibroin (SF)-based materials have been used to encapsulate the osteoblasts, forming an extracellular coated shell on the cells, which exhibited the high potential to shift the regulation of osteoblasts to osteocytes by encapsulation cues. SF coating treated cells showed a change in cell morphology from osteoblasts-like to osteocytes-like shape compared with untreated ones. Moreover, the expression of alkaline phosphatase (ALP), collagen I (Col I) and osteocalcin (OCN) further indicated a potential approach for inducing osteoblasts regulation, which typically accelerates calcium deposition and cell calcification, presenting a key role for the SF encapsulation in controlling osteoblasts behavior. This discovery showed that SF-based cell encapsulation could be used for osteoblasts behavior regulation, which offers a great potential to modulate mammalian cells’ phenotype involving alternating surrounding cues.     

基于OFDM的巷道和工作面无线移动通信研究

介绍了适合煤矿井下通信的无线技术“正交频分复用(OFDM)”,通过分析其多载波传输、非可视距性能和抗多径衰耗功能,认为可以在煤矿井下的巷道和工作面环境下高速、可靠地完成数据、话音和视频通信,对OFDM适合于井下通信的工作频带、调制技术和信号产生进行了分析。     

远程光纤甲烷气体传感系统的噪声抑制方法

论述了远程光纤甲烷气体传感系统的可靠性设计方案，采用半导体激光器光源开关调制方式发送光信号，通过光缆下传到各个气体传感单元，气体传感单元的光信号再通过光缆上传，返回到控制中心，有效抑制了传感过程中的外界白噪声，保证光纤甲烷气体传感系统的可靠工作。     

BSE系列耐低温乳化型震源药柱

概述了作药震源在石油、天然气地震勘探中的重要作用与国内现状。阐述了ＢＳＥ系列耐低温乳化型震源药柱的组分选择、品种配方、生产工艺与主要性能，讨论了该系列震源药柱的使用技术与获得的结果，预测了该系列震源药柱对我国地霞勘探技术发展的影响．     

煤矿工业电视系统中视频光纤传输系统的设计

论述了应用于煤矿工业电视系统中的视频光纤传输系统的工作原理 ,对光端机部分主要电路作了详细介绍 ,并给出了视频光端机的性能指标。该系统硬件集成度高 ,无中继传输距离长 ,性能价格比高 ,具有广阔的市场前景。